Explosion-Proof Floodlights TFD series

ข้อมูลสินค้า
  • ชื่อสินค้า : Explosion-Proof Floodlights TFD series
  • ยี่ห้อ : NSE
  • หมวดหมู่สินค้า : อุปกรณ์อื่นๆ
  • รหัสสินค้า :
  • ขนาด : Dimension (with support) W 505 x H 450 x T318 mm.
  • คุณสมบัติ :

    Product:  Explosion-Proof Floodlights TFD series

    Application:               

    • For use in hazardous locations due to the presence of flammable gases or vapors, combustible dusts or flying fibers, such as oil refineries, petrochemical plants, paint manufacturing plants, flour mills, powder paint process areas.
    • Suitable for indoor, outdoor or wet and corrosive locations.

    Spec:                                      

    • Electrical Range: 220 - 230V.AC. 50HZ
    • Powerplug 2P 16 Amp.
    • Cable 20 M.
    • HPS 400W Lamp with control gear
    • Dimension (lamp) W 495 x H 295 x T318 mm.
    • Dimension (with support) W 505 x H 450 x T318 mm.
    • Temp. Class (Surface Temp.) 40ºC Ta - T3C, 55ºC Ta - T3B

    Protection Index:       

    • IP65 according to IEC 60529

    Compliance:

    • UL Standard 844 Hazardous (Classified) Locations 1598 Luminaries                                           
    • North America (NEC 500): Class I Div. 1&2 Group C,D   Class II Div. 1&2 Group E,F,G   Class III   NEMA 3,4, 4X, 7 CD, 9 EFG                                           
    • North America (NEC 505): Class I Zone 1, AEx d IIB T2-T4                                             
    • EN Standard Comparison: II 2G Ex d IIB T2-T4 (Zone 1,2)                                    
    • Ambient Temperature Range: -40ºC to +55ºC

    Features:                               

    • Integral ballast, ignitor and condenser in housing
    • All threaded joints are flametight
    • Multi-finned housing for maximum heat dissipation.
    • Two pieces hinge, and gasket provided on the flange cover to protect against the ingress of dust or leakage of liqiuid
    • Permanently installed with adjustable bracket to provide rotation of wide angle in vertical
    • ¾ inch NPT standard conduit hub (other sizes or thread, please consult us).
    • Long life ballast with class H insulation wire
    • E40 lampholder with three-point anti-loose protection
    • Internal wring with high temperature cable
    • Connection on terminal block (4 mm.2 wire max) and one earth terminal lug and provided

    Materials: 

    • Housing - Copper-free aluminium (Cu<0.2%)
    • Len         - Heat and impact resistant clear glas
    • Bracket  - Stainless steelr
    • Internal Reflector - Anodized  aluminium.

    Finishes: 

    • Copper-free aluminium – Epoxy-polyester powder coated  finish, RAL 7037
    • Anodized aluminium and Stainless s steel-Natural
    •  
  • รายละเอียด :

    Product:  Explosion-Proof Floodlights TFD series

    Application:               

    • For use in hazardous locations due to the presence of flammable gases or vapors, combustible dusts or flying fibers, such as oil refineries, petrochemical plants, paint manufacturing plants, flour mills, powder paint process areas.
    • Suitable for indoor, outdoor or wet and corrosive locations.

    Spec:                                      

    • Electrical Range: 220 - 230V.AC. 50HZ
    • Powerplug 2P 16 Amp.
    • Cable 20 M.
    • HPS 400W Lamp with control gear
    • Dimension (lamp) W 495 x H 295 x T318 mm.
    • Dimension (with support) W 505 x H 450 x T318 mm.
    • Temp. Class (Surface Temp.) 40ºC Ta - T3C, 55ºC Ta - T3B

    Protection Index:       

    • IP65 according to IEC 60529

    Compliance:

    • UL Standard 844 Hazardous (Classified) Locations 1598 Luminaries                                           
    • North America (NEC 500): Class I Div. 1&2 Group C,D   Class II Div. 1&2 Group E,F,G   Class III   NEMA 3,4, 4X, 7 CD, 9 EFG                                           
    • North America (NEC 505): Class I Zone 1, AEx d IIB T2-T4                                             
    • EN Standard Comparison: II 2G Ex d IIB T2-T4 (Zone 1,2)                                    
    • Ambient Temperature Range: -40ºC to +55ºC

    Features:                               

    • Integral ballast, ignitor and condenser in housing
    • All threaded joints are flametight
    • Multi-finned housing for maximum heat dissipation.
    • Two pieces hinge, and gasket provided on the flange cover to protect against the ingress of dust or leakage of liqiuid
    • Permanently installed with adjustable bracket to provide rotation of wide angle in vertical
    • ¾ inch NPT standard conduit hub (other sizes or thread, please consult us).
    • Long life ballast with class H insulation wire
    • E40 lampholder with three-point anti-loose protection
    • Internal wring with high temperature cable
    • Connection on terminal block (4 mm.2 wire max) and one earth terminal lug and provided

    Materials: 

    • Housing - Copper-free aluminium (Cu<0.2%)
    • Len         - Heat and impact resistant clear glas
    • Bracket  - Stainless steelr
    • Internal Reflector - Anodized  aluminium.

    Finishes: 

    • Copper-free aluminium – Epoxy-polyester powder coated  finish, RAL 7037
    • Anodized aluminium and Stainless s steel-Natural